Audiovox DV-1680 manual External Connection, A/V Out

8. External Connection

You can connect the DVD Player to any audiovisual 8 equipment from the DVD Player'soutput terminals of DVD Player. You can also connect any audiovisual

equipment to the DVD Player's input terminals.

To switch the DVD Player'ssignal source between input and output, adjust the Input/Output switch(IN OUT).

Set the switch to the OUT position, to transmit signals from the DVD Player to other equipment.

Set the switch to the IN position for the DVD Player to receive signals from other equipment.

When the signal source of the DVD Player is in the IN position, the LCD on the front panel will not illuminate when no external signal is coming in.

Attention! Please set the IN/OUT switch at

OUT position for default setting, otherwise

no sound/screen will be heard/seen on the

player during playback.

8.1 A/V Out

When the A/V IN/OUT switch is in the OUT position, A/V signals will come out from the 3-in-1 A/V cable during playback. Use the DVD Player'sAV cable to transmit signal to the following components:

1.TV with A/V IN terminals

2.VCR/Video Cassette DVD player

Note:

Copy Guard Protection:

When the DVD player audio/video output is plugged into

the A/V input jacks of a Video Cassette Recorder (VCR)

using the audio/video cables, (red, white and yellow RCA

jacks) poor picture quality may result (i.e. screen on TV

getting brighter and dimmer) due to Macrovision copy

guard protection contained on some DVD discs.

3.V8 or VHS video cameras

4.Projector

36