5 Player Controls (5)
Player Controls (5)
1 | 3 | 2 |
|
|
1 AV Signal Jacks
The player accepts input signals(refer to item 2, fol- lowing) and provides output signals through the AV signal jacks.
When IN is selected (left) on the INPUT SELECT switch,the player is ready to accept signal inputs from an outside source. When OUT is selected (right), data may be sent to a variety of devices in-
cluding television, amplifier, VCR, tape recorder, video camera, laser disc player, and so on. Even with the out- put enabled, the player will continue to display video on its screen and broadcast sound from its speakers.
NOTE
Copy Guard Protection:
When the DVD player audio/video output is plugged into the A/V input jacks of a Video Cassette Recorder (VCR) using the audio/ video cables, (red, white and yellow RCA jacks) poor picture quality may result (i.e. screen on TV getting brighter and dim- mer) due to Macrovision copy guard protection contained on some DVD discs.
In IN mode, the player will accept inputs from the above mentioned devices for broadcast on its onboard LCD screen and speakers. Input signals are given precedence over any disc currently running on the player.
Please note when installing the AV wires that the white wire is designated for the left speaker, red wire for the right speaker, and yellow wire for the video signal.Correct installation at both ends will ensure proper video and au- dio replication on the DVD player.
28 | DVD1500 |