
Basic Operations
TV/AUDIO SELECTION
Continued
Press POWER on the TV and audio system.
1. Press “TV/VIDEO” on the TV, select VIDEO mode (TV).
• Select
TV/VIDEO
2. Select the correct audio input on the receiver.
•Each receiver is different from another, please refer to the manual of the receiver. (e.g., connect the audio output of the DVD to audio input of the receiver.)
DOLBY
Note: This step can be cancelled if you do not connect it to the receiver.
PLAY DISCS
DVD/LD
1.Press the POWER button to turn on the unit.
2.Press to open the disc tray and load a disc with the label side up.
3.Press again to close the disc tray. The unit begins to read the disc.
4.Press to play the disc.
After step 4 is finished:
• PLAY DVD
The TV Screen shows DVD menu and title menu.
• PLAY SUPER-VCD, VCD 2.0
The TV Screen shows the menu, the unit enters PBC status.
• PLAY CD, VCD 1.1
Press |
| , the unit plays the disc according to the track numbers. |
5. Press |
| to stop playback. |
| ||
|
• You have to push this button twice to stop the playback properly.
6. Remove the disc and power off the unit.
A P E X | D I G I T A L | 17 |