SETTING AND OPERATION
Video Out
The
1.Dock the compatable iPod on the unit and make sure the unit is in iPod mode.
2.Connect one end of the
3.From the main iPod menu, select Videos>Settings>TV Out and select ON.
4.Switch your iPod back to the movie library and play the movie of your choice.
NOTE:For the initial docking of the iPod(3Gen) nano, iPod classic and iPod touch, you may wait for the finishing of iPod authentication process then the video signal output to your TV sceen or monitor.
Radio Operation
Important: Prior to listening to the FM radio, fully extend the FM antenna for the maximum reception.
Radio Tuning
1.Press the POWER button to turn on the unit.
2.Press the FUNCTION button repeatedly until the RADIO icon appears on the LCD display.
3.To tune to a desired station manually, press the 
or 
buttons repeatedly until the station is reached.
4.To scan the station automatically, press and hold the 
or 
buttons on the unit. It can also be changed by pressing the 
or 
buttons on the remote control.
5.Stereo and mono radio can be selected by pressing the ST / MONO button on the remote control.
6.The volume level can be adjusted by pressing the VOL+/- buttons on the unit or on the remote control.
NOTE:
-Use manual tuning to select weaker stations that might be bypassed during automatic tuning.
-If the automatic search does not stop at the exact frequency, for example, it stops at 100.9MHz instead of 100.8MHz, press TUN +/- to finely tune the exact frequency.
Preset Station
The unit allows you to store up to 4 preset FM stations in the preset memories for easy recalling any time.
1.Press the POWER button to turn on the unit.
2.Press the FUNCTION button to select RADIO.
3.Tune to your desire radio station by pressing Tune UP/DOWN buttons.
4.Select a button of P1, P2, P3 or P4 on the remote control.
5.Press and hold the button you want to program until PRESET number icon appears on LCD display. The station is saved in the preset button now.
6.To store more stations, repeat the steps 4 and 5.
E10