Jensen JiMS-190 owner manual Troubleshooting Guide, Solution

TROUBLESHOOTING GUIDE

Symptom	Possible Problem	Solution
	AC Adaptor is not plugged into a	Plug the AC adaptor into a wall
	wall outlet or the connector is not	outlet and plug the connector into
The unit does	plugged into the power supply jack	the supply jack on the unit.
not respond (no power)	on the back of the unit.
	Wall outlet is not functioning.	Plug another device into the same
		outlet to confirm the outlet is working.
	Using no/wrong iPod® Adaptor	Make sure the dock insert is the
		proper fit for your iPod®
iPod® does not		Remove your iPod® from the dock
dock properly	iPod® does not install properly.	and check for obstruction on the
		connectors in the dock and on your
		iPod®. Then reseat it in the dock.
	iPod® is not installed properly.	Remove your iPod® from the dock
		and check for obstruction on the
		connectors in the dock and on your
iPod® does not respond		iPod®. Then reseat it on the dock.
to the speaker system	Your iPod® is locked up.	Please make sure that your iPod® is
		working properly before docking into
		the unit. Please refer to your iPod®
		manual for details.
	iPod® is not installed properly.	Remove your iPod® from the dock
		and check for obstruction on the
		connectors in the dock and on your
		iPod®. Then reseat it in the dock.
iPod® does not	iPod® is locked up/ frozen.	Please make sure your iPod® is
charge up	iPod® battery has problem.	working properly before docking into
		the unit. Please refer to your iPod®
		manual for details.
	Unit is in Radio mode	Select iPod, AUX or Standby mode
		for iPod charging
iPod unintentionally	It may be caused during function	Wait for 3 minutes, iPod will enter
wake up in PAUSE	switching	sleep mode automatically
mode
AM band is too noisy	The reception at the set location is	Slightly rotate the unit for the best
	poor.	reception.
	Volume level is set too high.	Decrease the volume.
		If the iPod original sound source is of
		poor quality, distortion and noise are
		easily noticed with high-power
		speakers. Try a different audio source
Sound is distorted	Sound source is distorted.	such as a music CD.
		If you are using an external sound
		source like older generation of iPod®,
		try reducing the output volume on the
		device itself. Also try turning bass
		boost OFF or change the EQ setting.
Unit gets warm after	This is normal.	Turn the unit off for a period of time or
extended play at		lower volume.
high volume

13