Jensen JiMS-190 owner manual Product Features, Installation

Page 6

PRODUCT FEATURES

JiMS-190 is an iPod® Docking Music System which incorporates the following features:

-iPod®, iPod® mini, iPod classic, iPod touch and iPod nano Player / Recharger

-Audio Line-in for Connecting CD Player or Other Digital Audio Player

-2 Built-in High Fidelity Aluminum Cone Speakers

-Multi-function Blue Back-lit LCD Display

-AM/FM Stereo Receiver with 10AM + 10FM Presets, Digital Tuning and Auto Search Function

-Electronic Volume Control

-Wake to Radio, Alarm or iPod®

-Snooze and Sleep Functions

-Built-in Contractible Aux Cord with 3.5mm Aux Plug

-External FM Antenna Jack for Better FM Reception

-Card Size Remote Control for Radio and iPod® Functions

-Output: 2 X 3W RMS

INSTALLATION

Clock Back-up Batteries Installation

1.Open the battery compartment door located at the bottom of the unit.

2.Install two DC1.5V 'AAA' (UM-4) batteries (not included) in the battery compartment following the polarity markings shown on it.

3.Replace the battery door on the battery compartment.

NOTE:Please disconnect the main power from the unit before replacing the clock back-up batteries.

WARNING:

-Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.

-Do not mix old and new batteries.

-Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

-Only batteries of the same or equivalent type as recommend are to be used.

-If the unit is not to be used for an extended period of time, remove the battery.

-Do not dispose of batteries in fire, batteries may explode or leak.

FM Antenna Installation

The FM Antenna Wire is provided in the package. Please see the illustration below for FM Antenna Wire installation.

Connect the FM Antenna Wire to the antenna terminal at the rear of the main unit

Remote Control

The remote control operates on one CR2032 battery (included). To activate the remote control, remove the insulation tab inserted in the battery compartment.

AC-DC Adaptor Connection

An AC-DC Adaptor with the output DC10V 1400mA (included) is required for operating the main unit. 1.Firmly insert the DC plug of the adaptor (included) into the DC Jack on the back of the unit 2.Plug the adaptor's AC plug into your household AC power outlet (120VAC/60Hz).

NOTE: This unit is not magnetically shielded and may cause color distortion on the screen of some

TVs or video monitors. To avoid this, you may need to move the unit further away from the TV or monitor if unnatural color shifts or image distortion occurs.

4

Image 6
Contents JiMS-190 Page Table of Contents Important Safety Instructions Dear Jensen CustomerCompliance with FCC Regulations Product Features InstallationLocation of Controls Main Unit Top view Front view Bottom view Rear viewRemote Control Radio Operations IPod Docking You may control the playback of your iPod byAuxiliary Input 12/24 Hour Time Display Mode Setting Clock and Calendar SettingsClock Setting Calendar Setting YearAlarm Operations Setting the Alarm TimeWake to Buzzer BUZ Care and Maintenance Resetting the UnitTroubleshooting Guide SolutionPower Supply SpecificationsService Frequency Range