Recharging Your Apple Device, Connecting

Adjust the position of the support by turning the barrel shaped knob (located on the back of the assembly) either clockwise or counter-clockwise until the front padded part of the barrel touches the back of your iPad, iPod or Phone. The barrel shaped knob will move forward or back as it’s turned. The Apple device should be angled slightly backwards to secure the docking.

LISTENING TO YOUR iPad/iPod/iPhone

RECHARGING YOUR APPLE DEVICE

This unit supports various models of iPad, iPod or iPhone with 30-pin dock connectors. Even if the Dock is in standby mode, once your iPad, iPod or iPhone is docked onto the docking connector, the charging will start automatically.

Note: Due to a change in iPod design, the charging function of this unit does not support the iPod classic or 5th gen iPod video.

CONNECTING

1). Place your iPad/iPod/iPhone into the docking port by placing the connector on the bottom of the iPad/iPod/iPhone onto the connector in the docking bay.

Note: Please be careful when placing the iPad/iPod/iPhone into the docking bay to avoid damaging the 30-pin connector on the iPad/iPod/iPhone or on the docking system.

2). Press the POWER button to turn on the unit, the blue rings around the VOLUME Up/Down and POWER buttons light solid. If the unit is in AUX mode, the blue rings around the VOLUME Up/Down and POWER buttons flash every 4 seconds. Press the FUNC button on remote control or tap the FUNC button on the main unit to select iPod/iPad/iPhone mode, the blue LED rings will light solid.

3)Select music from your iPad, iPod or iPhone and press the PLAY/PAUSE button on the remote to start playback.

4). Press the PLAY/PAUSE button on the remote control to pause the play back. Press it again to resume.

5). Adjust the sound level by pressing the Volume + / – buttons.

Note: The volume level cannot be adjusted using the volume control on your iPad/iPod/iPhone after being docked.

6). Press SKIP/FAST FORWARD or BACKWARD button on the remote control to select the previous or next song.

7). Press the STANDBY button on the remote control or press and hold the / FUNC button for 5 seconds to turn the unit to STANDBY mode after listening.