Auxiliary Input, Resetting | Jensen JIPS-290I specification

Note: MEMU / buttons on the remote control may not work for your iPad.

7.The video can be switched between the local Apple device screen (default) and Video-out

by pressing VIDEO ON/OFF button and then select a video from video library to play. Note: 1). If you are using iPad, you can simple press the VIDEO ON/OFF button and then

Play/Pause button to switch video play back on iPad’s screen or TV.

2). If you are using the iPod nano, iPod classic or iPod video, VIDEO ON/OFF button will be no function for these iPod models, you need to turn on the TV Out option manually from the video setting menu of your iPod.

8.Press the VOLUME Up (+) / Down (-) buttons on the unit or remote to adjust the sound output level.

Note: If you remove the iPad / iPod / iPhone from the docking connector and dock it again later, the Apple device will revert back to its default play mode and play videos on the screen of the Apple device. You need to follow above instructions again to set TV Out of your Apple device if you want to watch its videos on a TV.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players, CD players and older, non-dockable iPods (except iPod shuffle 3rd gen) and listen to your external source through the speakers of this system.

1.Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.

2.Plug one end into the Aux-in jack on the main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.

3.Turn on the external audio device.

4.To select auxiliary audio input, press the FUNCTION button to select “AUX” mode. the blue rings around the VOLUME Up/Down and POWER buttons flash every 4 seconds.

5.The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.

Note:

(1)If you connected the Line Out Jack of your external device then you only need to adjust the volume control of this system. If you connected the Headphone Jack of your external device then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting.

(2)Press the POWER button to turning off the system when you finish listening. Don't forget to switch off the power of your external device as well.

RESETTING

If the system does not respond or has erratic or intermittent operation, you may have experienced an electrostatic discharge (ESD) or a power surge that triggered the internal computer to shut down automatically. If this occurs, simply disconnect the main power, wait one minute and reconnect the main power again.