SETTING THE ALARM TIME
1.Set the Clock Setting Switch (#5) to the “ALM” position. The 2 dots between the hour and minutes will begin flashing.
2.Rotate the Rotary Set Dial (#8) counterclockwise or clockwise for adjusting the hour or minute for the alarm respectively.
3.Once the alarm is adjusted to the desired
4.Note: Do not rotate the dial too quickly when you are setting the clock or alarm to insure desired time and alarm settings.
ALARM OPERATION
Set the ON/AUTO/OFF Switch (#6) to the “AUTO” position. The AUTO Indicator (#20) will light.
-WAKE TO RADIO
Set the radio Tuning Control Knob (#10) to the station you wish to listen to when the alarm time is reached. Set the Volume/Buzz Knob (#12) to a desired volume level. The radio will now turn on at the selected alarm time.
-WAKE TO BUZZER
Slide the Volume/Buzz Knob (#12) to the BUZZ position. The buzzer will now turn on at the selected alarm time.
TIME SETTING FOCUSING FOR PROJECTION CLOCK
-To set the hours, simultaneously press and hold the Hour Button (#16) and the Time Button (#18). Keep them depressed until the desired hour digits are displayed.
-To preset the minutes, simultaneously press and hold the Minute Button (#15) and the Time Button (#18). Keep them depressed until the desired minute digits are displayed.
-Focusing: Adjust the projection clock clarity by turning the Focus Adjustment Knob (#17) until the projected time is clearly shown on the ceiling or wall.
Note:
1.The LED Digital Clock and the Projection Clock must be set separately.
2.The projected time is visible on a ceiling or wall in a darkened room. The maximum projection distance is
P6