1.Start by saying the trigger word “Hello Clock Radio” or press the SNOOZE BAR (#11).
2.The unit will reply “Yes” and will wait for your next command.
3.Say “Alarm” and the unit will announce the Alarm One time, play a brief sample of the alarm sound and also ask if you want to turn the alarm off if on.
4.Alarm Two settings will be announced in the same way once the Alarm One setting checks are completed.
a.Example: You say “Alarm”.
b.The unit will reply, “Alarm One is set to …” and announce the time alarm one is set to.
c.If Alarm one is on, the unit will continue, “The Alarm is On” and play a brief sample of the alarm sound for it.
d.The unit will now ask “Would you like to turn off the Alarm?”
e.If you say “Yes”, the unit will reply “Alarm One is Off” and proceed to announce the Alarm Two settings. If you say “No”, it will proceed to Alarm Two.
f.Alarm Two check will be announced in the same way as alarm one above.
SNOOZE FUNCTION
When the preset alarm time is reached, the chosen alarm sound will start. You can momentarily stop the alarm sound for 9 minutes by using the snooze function. The snooze function can be repeated for a maximum of 6 times within 60 minutes from the original preset alarm time.
MANUAL OPERATION
1.When any alarm is sounding, press the SNOOZE BAR (#11) for a
2.The SNOOZE INDICATOR (#28) will turn on.
3.When snooze expires, the alarm sound will resume.
4.You can repeat snooze operation for a maximum of 6 times within 60 minutes from the original preset alarm time.
5.You can cancel snooze any time by pressing the ON/OFF BUTTON (#12).
6.The SNOOZE INDICATOR (#28) will go off.
7.The alarm will now be off and ready to sound the next day at the preset time.
USING TALK ’N SET
1.When the designated alarm time is reached, there will be a periodic pause in the alarm sound if you have chosen a nature sound (Ocean, Rain or Brook) or the Beep for your wake alarm. This is normal and during the pause is where the unit is listening for the “Snooze” command.
Note: If radio is chosen as the alarm sound, it will play without interruption and therefore you will not be able to use Talk ’N Set “Snooze” command to activate the snooze. This will need to be done manually by pressing the SNOOZE BAR (#11).
2.Say “Snooze” during one of the pauses in the alarm sound to activate the
3.If your command is correctly recognized, the SNOOZE INDICATOR (#28) will turn on.
4.When snooze expires, the alarm sound will resume.
5.You can repeat snooze operation for a maximum of 6 times within 60 minutes from the original preset alarm time.
6.You can cancel snooze any time by saying “Alarm Off” or manually pressing ON/OFF BUTTON (#12).
7.If you press the SLEEP BUTTON (#10) once, snooze and only the alarm in effect will be cancelled at once and go into sleep mode directly. The desired sleep time can be adjusted by pressing the SLEEP BUTTON (#10) repeatedly.
8.If the “Alarm Off” command is correctly recognized, the unit will reply “Yes” and SNOOZE INDICATOR (#28) will go off.
9.The alarm will now be off and ready to sound the next day at the preset time.
TURNING OFF THE ALARM
You can turn the alarm off for the day only so that it will sound again on the following day or you can turn the alarm completely off by disabling it.
MANUAL OPERATION
1.When an alarm is sounding, press the ON/OFF button (#12) to turn the alarm off only for the day. The alarm will sound again the next day at the same preset time. The alarm indicators on the display (#25 & #26) will remain on.