Time | To check the current time. |
| * Factory preset time is 12:00AM. |
Set Time | To set the current time in AM or PM. |
Alarm | To check the alarm time and status of AL1 & AL2. If the alarm is currently off, |
| you have the option to turn it on or vice versa. |
| * Factory preset alarm time is 7:00AM for AL1 and 8:00AM for AL2. |
Set Alarm | To set the alarm time of AL1 & AL2 in AM or PM. |
Alarm Sound | To set the alarm sound for AL1 & AL2. You can select from among 3 nature |
| sounds (Ocean, Rain or Brook), radio or the beep alarm. |
| * Factory preset alarm sound is beep alarm for both AL1 & AL2. |
Alarm Off | To cancel current alarm for the day while alarming is sounding or clock is in |
| snooze mode. |
Snooze | To activate the 9 minute Snooze while an alarm is sounding. You must say the |
| command word “Snooze” during the brief pause during the alarm (except radio |
| mode in which you need to tap the SNOOZE BAR) for it to work correctly. |
Play Sleep Sound | To choose a sleep sound from among 3 nature sounds (Ocean, Rain or Brook), |
| or radio and then to set sleep time for 15, 30, 45 or 60 minutes or to turn it off. |
| The sleep time is default to 60 minutes. You can adjust sleep sound output |
| between levels |
| * Factory preset sleep sound is Ocean and its output level is “2”. |
Display | To set the LCD backlight brightness to HI or LO. |
| * Factory preset LCD brightness is “High”. |
Cancel | To terminate the Talk ’N Set function immediately after it is activated. |
| It can also be used in the middle to terminate certain Talk ’N Set commands: Set |
| Alarm, Alarm Sound, Play Sleep Sound and Display. |
CURRENT TIME SETTING AND REPORTING
TO SET THE CURRENT TIME
1.Start by saying the trigger word “Hello Clock Radio” or press the SNOOZE BAR (#11).
2.The unit will reply “Yes” and will wait for your next command.
3.Say “Set Time” and the unit will reply “Tell me the current time including AM or PM”.
4.Say the current time you wish to set the clock to. Example: to set the clock to 3:23AM, say “Three Twenty Three AM”.
5.When the time is successfully understood, the unit will reply, “The time is …” and repeat the time you gave. Example: if you said to set the time to 3:23AM, the reply will be “The time is
6.If the unit fails to understand the time given, it will reply, “I’m sorry. I didn’t get that. Please tell me the current time, for example,
7.If the unit fails to understand the time given a second time, it will reply, “I’m sorry. I did not understand you, please start over or set the time manually”. If this occurs, repeat steps #1 - 4 above again making sure you speak clearly in a normal voice and avoid pauses between words.
TO CHECK THE CURRENT TIME
1.Start by saying the trigger word “Hello Clock Radio” or press the SNOOZE BAR (#11).
2.The unit will reply “Yes” and will wait for your next command.
3.Say “Time” and the unit will reply “The time is ...” followed by the present time.
ALARM TIME AND ALARM SOUND SETTING / CHECKING
TO SET THE ALARM TIME (AL1/AL2)
1.Start by saying the trigger word “Hello Clock Radio” or press the SNOOZE BAR (#11).
2.The unit will reply “Yes” and will wait for your next command.
3.Say “Set Alarm” and the unit will reply “Say Alarm One or Alarm Two”.
4.To set Alarm One, say “Alarm One”. You can also say the command “Cancel” during this step if you wish to cancel setting the alarm and the unit will reply “OK” to confirm..
5.If the unit fails to understand the alarm source given, it will reply, “Please Repeat”. Now repeat step #4 above.
6.If the unit fails to understand the alarm source given a second time, it will reply “I’m sorry. I did not understand you, please start over or set the alarm time manually”. If this occurs, repeat steps #1 - 4 above again making sure you speak clearly in a normal voice.