Grundig YB550PE Autoscan Tuning While in Shortwave, Shortwave Band Chart Autoscaning Ranges

Page 15

USING SHORTWAVE continued

AUTOSCAN TUNING WHILE IN SHORTWAVE

In shortwave, autoscan tuning only autoscans in the short- wave frequency ranges noted below in the SHORTWAVE BAND CHART OF AUTOSCANNING RANGES. To tune short- wave frequencies that are in-between these ranges, or out- side of these ranges, use one of the other tuning methods.

SHORTWAVE BAND CHART

OF AUTOSCANING RANGES

BAND (meters}

FREQUENCY RANGE (kilohertz)

120

2250 - 2550

 

 

90

3150 - 3450

75

3850 - 4050

 

 

60

4700 - 5100

49

5800 - 6300

 

 

41

7100 - 7500

31

9400 - 1000

 

 

25

11500 - 12150

22

13500 - 13900

 

 

19

15000 - 15900

16

17450 - 18000

 

 

15

18850 - 19100

13

21450 - 21950

 

 

11

25600 - 26100

 

 

YB 550PE OPERATION MANUAL

6CLOCK AND ALARM FEATURES

SETTING THE CLOCK

The factory default has set the clock to function as a 24 hour format clock. If you prefer a 12 hour, AM/PM clock format, see the section titled CHANGING THE CLOCK FORMAT, on page 39.

To set the clock:

1.Turn the radio off. The clock digits appear in the lower portion of the display (28).

2.Press/release the button labeled ‘Time Set’ (5). The clock’s digits flash in the display.

3.Within 5 seconds, set the hour using the + button and the minutes using the – button. Make sure that AM or PM (29) appear in the display appropriately for the time of day if your clock is set up in the 12 hr. AM/PM format.

4.Within 5 seconds of finishing, press/release the ‘Time Set’ button twice.

28

29

Image 15
Contents Descriptions and Functions of Front YB550PEDo YOU Need HELP? Table of Contents Introduction Table of ContentsLeft Side Diagrams FrontBack TOPShortwave Meter Band Display Radio OFF DisplayRadio on Display Memory DisplayQuick Guide Selecting a Shortwave Meter Band Shortwave Band Chart Autoscaning RangesStoring a Frequency Into Memory Accessing What is Stored Into MemoryInstalling Batteries Deleting Memories and Memory PagesLearning More about the YB 550PE Selecting and Using AN AC Adaptor Signal Strength and Battery Strength IndicatorImportant Initial SET-UP Selecting FM, AM or Shortwave Volume and Tone ControlsBasic Radio Operation Turning on and OFFFour Ways to Tune in Stations Setting UP AM and FM Outside of North AmericaSelecting a Shortwave Meter Band Using ShortwaveSetting the Clock Autoscan Tuning While in ShortwaveShortwave Band Chart Autoscaning Ranges Clock and Alarm FeaturesFavorite Station WAKE-UP Setting the AlarmUsing the Snooze Feature Activating and Deactivating the AlarmWorking with Memory Selecting Memory PagesStoring Stations Into Memory Accessing What is Stored Into Memory Memory SearchMemory Autoscan Customizing Memory Pages Deleting ALL Memory Contents of aMoving a Stored Frequency Deleting a Stored FrequencySystem SET Code Table Changing System SET CodesChanging the Clock Format Default Factory System SET Codes Used for North America Monitoring Current SET Code StatusSystem SET Code Table Additional Information Using the LightUsing Earphones Using the DX Local SwitchUsing the Lock Switch Preventing Battery Acid LeakageTroubleshooting There is no Sound from the Speaker Reset ProcedureOperates Erratically Stations are Received TOO WeakMajor Features of the YB 550PE ONE Year Limited Warranty Service InformationFor Service Information Contact 254