CLOCK AND ALARM FEATURES continued
SETTING THE ALARM
After setting the alarm time, be sure to read the next section titled ACTIVATING AND DEACTIVATING THE ALARM. The alarm will wake you to the last radio station tuned, unless set for Favorite Station
1.Turn the radio off. The alarm clock digits (26) appear in the upper right corner of the display.
2.Press/release the button labeled ‘Time Set’ twice. The alarm clock’s digits flash in the display.
3.Within 5 seconds, set the hour using the + button and the minutes using the – button. Make sure that AM or PM (25) appear in the display appropriately for the time of day if your clock is set up in the 12 hr. AM/PM format.
4.Within 5 seconds of finishing, press the ‘Time Set’ button once.
FAVORITE STATION WAKE-UP
Use system set code 01. See pages
YB 550PE OPERATION MANUAL
CLOCK AND ALARM FEATURES continued
USING THE SNOOZE FEATURE
When the alarm activates and turns the radio on, the symbol appears flashing in the display. While it is flashing, press/release the SNOOZE/LIGHT button (22). The radio will turn off and then turn on again in 10 minutes. This process can be repeated 3 times.
ACTIVATING AND DEACTIVATING THE ALARM
For the alarm to function, it must be activated by pressing the
button labeled ALARM (3). The symbol (27) appears in the display. To deactivate the alarm, press/release the ALARM
button again, causing the symbol to disappear from the display.
Note that once the alarm turns on the radio and the above pictured alarm symbol is flashing, except for the SNOOZE/LIGHT button, the radio’s controls will not function until the
30 | 31 |