8SYSTEM SET CODE TABLE
Certain functions can be programmed and changed using SYSTEM SET CODES. These functions and their descriptions are noted in the SYSTEM SET CODE TABLE, on Page 41.
CHANGING SYSTEM SET CODES
To enter a system code of your choice, use the procedure below.
1.Turn off the radio.
2.Press/release the ‘Sys. Set’ button (6). Note that ‘- - ‘ (39) appears in the upper right corner of the display and the clock digits disappear.
3.Within 5 seconds, enter the desired numeric code with the numeric key pad, then immediately press/release the but- ton labeled ENTER. The code ICON (40) will briefly appear in the lower right corner of the display.
YB 550PE OPERATION MANUAL
SYSTEM SET CODE TABLE continued
CHANGING THE CLOCK FORMAT
The instructions below serve as an excellent example of how to change a system set code, in this case changing the clock system to a 12 hour format:
1.Turn off the radio.
2.Press/release the ‘Sys. Set’ button. Note that ‘- - ‘ appears in the upper right corner of the display and the clock dig- its disappear.
3.Within 5 seconds, enter 12 with the numeric keypad, then immediately press/release the button labeled ENTER. ‘12H’ briefly appears in the display.
38 | 39 |