Jensen JCR-275 user manual Getting Started, Setting UP the Calendar and Clock

Page 6

1.Do not mix old and new batteries.

2.Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

3.If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and may void the warranty.

4.Do not dispose of batteries in fire, batteries may explode or leak.

5.Replace all the batteries at the same time, no matter exhausted or not, every 2 years at the same time to avoid possible battery leakage.

GETTING STARTED

Please be sure the outlet you plug this unit into is working and provides uninterrupted power.

1.Insert the plug of the AC power cord into a 120V~ 60Hz outlet.

2.Press the RESET BUTTON (#11) on the bottom of the unit with a pointed object (e.g. a straighten paper clip) to initialize. After a brief self test, the unit enters the clock mode at 12:00AM.

IMPORTANT

There is a sensor located on top of the unit that picks up any movement or objects near the top or back of the unit. Please be sure to place the radio on a surface with a no obstructions 9-12 inches above or 3-6 inches behind the unit. This will help maximize the area for recognizing the motion of your hand and also reduce the chances of the unit false triggering. If the unit begins beeping and the display functions erratically, it may be either too close to an object above or behind the unit. If this happens, please make sure there are 9-12 inches of clearance above and 3-6 inches behind the unit to avoid the false triggering.

SETTING UP THE CALENDAR AND CLOCK

Setting up the Calendar and Clock in normal time or radio mode:

E-5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents AM/FM Dual Alarm Clock Radio with Wave Sensor Model JCR-275 Important Safety Instructions Compliance with FCC Regulations Protect Your Furniture Dear Jensen CustomerPower Requirements Location of ControlsControls and Functions of Unit Setting UP the Calendar and Clock Getting StartedSetting UP the Alarms Setting UP the Time ZoneCalendar and Temperature Display DST Daylight Saving TimeSnooze Function Sleep Timer OperationsUsing the AUX in to Listen to External Audio Player Listening to RadioWhile the alarm is sounding, to turn snooze function on Infrared Sensor FunctionRadio on mode, to turn sleep function on Resetting the Unit Dimmer ControlNight Light Troubleshooting Guide SpecificationsCare and Maintenance Symptom Possible Cause SolutionDAY Limited Warranty and Service Valid in the U.S.A only
Top Page Image Contents