６．When the preset wake up time is reached the selected wakeup mode turns “On”. The respective
ALARM Indicator（ＡＬ１ | ｏｒ ＡＬ２）ａｎｄ Wakeup | mode ｉｃｏｎ（ | ｏｒ | ）will flash. |
The alarm will continue | to sound and last for ３ 0 | minutes before | turning off | automatically. |
The alarm remains set and will turn the JＣＲ－２６３ on again at the same time on the following day. ７． To stop the alarm before the alarm time elapses, press the ＡＬＡＲＭ ＯＦＦ Button (# 14). The
alarm will stop but the alarm remains set and will turn
following day.
８． If you do not want the alarm to turn JＣＲ－２６３ on the following day, press the ALARM1 ｏｒ
ＡＬＡＲＭ２ Ｂｕｔｔｏｎｓ | ｒｅｐｅａｔｅｄｌｙ ｕｎｔｉｌ | ｔｈｅ | ＡＬＡＲＭ１ or |
ＡＬＡＲＭ２ Indicator(s), Ａlarm | ｔｉｍｅ（ｓ）ａｎｄ Wakeup mode Icon （ | ｏｒ | ） disappear in |
the LCD.
Note:
If you have chosen “Wake to RADIO” alarm mode, make sure that you have tuned to a station and adjusted the volume to a comfortable level.
SNOOZE OPERATION
1.When the alarm sounds (buzzer or radio), you can press the SNOOZE Button to extend the alarm time by 9
minutes. The ｒｅｓｐｅｃｔｉｖｅ | ALARM Ｉｎｄｉｃａｔｏｒ（ＡＬ１ ｏｒ ＡＬ２） ａｎｄ |
Ｗａｋｅｕｐ mode Ｉｃｏｎ（ ｏｒ | ） will ｂｌｉｎｋ ａｎｄ ｔhe SNOOZE Indicator ‘SNZ’ appears in |
the Display. The buzzer or radio will then turn on again when the snooze duration has elapsed.
2.The SNOOZE operation can be repeated several times within the 30 minutes alarm duration.
ＮＡＰ OPERATION
Ｔｈｅ ＪＣＲ－２６３ ｉｓ ｅｑｕｉｐｐｅｄ ｗｉｔｈ ｔｈｅ ＮＡＰ ｆｕｎｃｔｉｏｎ．
Ｔｈｅ ＮＡＰ ｔｉｍｅ ｉｓ ａｄｊｕｓｔａｂｌｅ ｆｒｏｍ １０ ｔｏ １１９ ｍｉｎｕｔｅｓ． Ｔｈｅ ｄｅｆａｕｌｔｅｄ ＮＡＰ ｔｉｍｅ ｉｓ ３０ ｍｉｎｕｔｅｓ．
１． Ｔｏ ａｃｔｉｖａｔｅ ｔｈｅ ＮＡＰ ｆｕｎｃｔｉｏｎ， ｉｎ ＰＯＷＥＲ Ｏｆｆ ｍｏｄｅ ｐｒｅｓｓ ｔｈｅ ＮＡＰ Ｂｕｔｔｏｎ ｏｎｃｅ． Ｔｈｅ Ｄｉｓｐｌａｙ ｗｉｌｌ ｓｈｏｗ ３０ ｍｉｎｕｔｅｓ ｏｆ ＮＡＰ ｔｉｍｅ ａｎｄ ＪＣＲ－２６３ ｗｉｌｌ ｔｕｒｎ ｏｎ ｗｈｅｎ ｔｈｅ ３０
ｍｉｎｕｔｅｓ ｈａｓ ｅｌａｐｓｅｄ．
２． | Ｔｏ ｉｎｃｒｅａｓｅ | ｏｒ ｄｅｃｒｅａｓｅ ｔｈｅ ＮＡＰ ｔｉｍｅ， | ｋｅｅｐ |
| ｐｒｅｓｓｉｎｇ ａｎｄ | ｒｅｌｅａｓｅ ｔｈｅTIME SET ! or " Buttons | until |
time (10~119 minutes) is shown in the LCD.
6