II.This receiver has a
AUX OPERATION
THIS UNIT FEATURES AN AUX
1.Connect the headphone jack of your external device to the AUX IN Jack (# 8) located on the back of the JＣＲ－２６３ (cable not included).
2.Turn on the JＣＲ－２６３ and set the FUNCTION Selector (# 9) to the “AUX” position.
3.Start playing your iPod, MP3 player or other external audio device.
4.Slowly adjust both volume controls on the JＣＲ－２６３ and the external device.
5.Turn off your iPod, MP3 player etc. when finish listening.
6.Turn the ＪＣＲ－２６３ off and unplug the AUX
ＳＥＴＴＩＮＧ ALARM ＴＩＭＥ AND WAKE UP MODE
The
The JＣＲ-２６３ provides wake to RADIO or ALARM BUZZER ｏｐｔｉｏｎｓ．
Setting ALARM Time（ｓ）Ａｎｄ Wake Up Mode |
|
| |
Note: Ｔｈｅ Alarm time（ｓ）can be set | ｅｉｔｈｅｒ in ＰＯＷＥＲ ＯＮ ｏｒ ＯＦＦ mode. |
| |
1. Set the Clock Set Selector (# 18) to | AL1 ｏｒ | ＡＬ２. Ｔｈｅ respective ALARM 1 (AL1) | ｏｒ |
ＡＬＡＲＭ 2 (AL2) Indicator will appear with ‘AM 12:00’ blinking in the Display.
2.While the ‘AM 12:00’ is blinking, press and hold the TIME SET ! or " Buttons. The Digits will skip forward or backward rapidly.
3.Keep pressing and release the TIME SET ! or " Buttons (# 15 or # 16) to adjust the time. The Hour and Minute digits will advance forward or backward rapidly.
4.Keep pressing and release the Buttons when the displayed clock time is close to the desired alarm time. Repeatedly press the ! or " Buttons to adjust the alarm time precisely.
Note: Make sure the hour is set so that AM or PM is correctly displayed.
5.Set the Clock Set Selector (# 18) to the “LOCK” position to complete the setting.
or Ｉｎｄｉｃａｔｏｒ ｄｉｓａｐｐｅａｒs ｉｎ ｔｈｅ ＬＣＤ Ｄｉｓｐｌａｙ．
6.If you want to be woke up by ALARM 1 ｏｒ ＡＬＡＲＭ２, press ALARM1 (# 1) ｏｒ ＡＬＡＲＭ２
Button (# 17) | once．Ｔｈｅ respective ＡＬＡＲＭ Ｉｎｄｉｃａｔｏｒ | , Ａｌａｒｍ | ｔｉｍｅ | ａｎｄ | ||
the ‘Wａｋｅ | ｔｏ | Bｕｚｚｅｒ’ｉｃｏｎ ｗｉｌｌ | ａｐｐｅａｒ | ｉｎ ｔｈｅ | Ｄｉｓｐｌａｙ． | |
Ｐｒｅｓｓ | ｔｈｅ | respective Ａlarm Ｂｕｕｔｏn | ａｇａｉｎ | ｗｉｌｌ ｓｗｉｔｃｈ | ｔｈｅ | |
Ｗａｋｅｕｐ | ｍｏｄｅ ｆｒｏｍ ｂｕｚｚｅｒ（ ）ｔｏ ｒａｄｉｏ（ ）． |
|
| |||
5