Replacing TOP and Front Lens, Care and Maintenance

IMPORTANT:

Remember that the station and volume settings you choose for the SLEEP TO MUSIC operation are the same settings you will hear if you set the alarm for wake to radio the following morning.

REPLACING TOP AND FRONT LENS

There are four interchangeable top and front lens’ in assorted colors included that can be used in place of the panels that come pre-installed. Follow the steps below to replace the lens’.

1.Insert the provided tool between the cabinet and the lens as shown below.

2.Lift the tool upward to pry the lens free and remove. Store the lens you just removed in a safe place to avoid damage.

3.Insert the end of the lens with the tabs into cabinet opening first. Make sure the small tabs on the lens line-up with the notches in the cabinet; see the illustrations below with arrows showing where the tabs should be inserted.

4.Gently push down on the lens making sure it snaps down into position. For the top lens you may need to adjust the buttons slightly so the lens seats properly on the cabinet. Make sure all the buttons stick out through the openings in the lens.

5.You may need to repeat the operation if the lens does not snap into place properly.

CARE AND MAINTENANCE

1.Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never be used.

2.Avoid operating your unit under direct sunlight or in hot, humid or dusty places.

3.Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.

4.For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination.

5.Unplug the unit from the electrical power outlet immediately in case of malfunction.