MTEK6000 SERIES USER'S MANUAL
Flow Units
The flow units parameter reflects the time used to represent the flow rate. For example, if the flow rate represents cubic feet per hour, this parameter should be set to Hour. The Default value is 2.
Minute 1
Hour 2
Day 3
Gas Day Roll Time HHMM (Hours, Minutes)
This item is used in Daily and Monthly history modes to determine when the gas day ends. The time is entered in military time. For example, a standard roll time of 8:00AM is entered as 800.0. The Range is 0 to 2359. The default value is 800.
High Differential Pressure Alarm Setpoint The setpoint at which the unit determines that there is a High Differential Pressure alarm condition. The Default value is 1500.
High Differential Pressure Alarm Reset After a High Differential Pressure alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is 1480.
High Flow Rate Alarm Reset
After a High Flow Rate alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is 99,990.
High Flow Rate Alarm Setpoint
The setpoint at which the unit determines that there is a High Flow Rate alarm condition. The Default value is 100,000.
High Pressure Alarm Setpoint
The setpoint at which the unit determines that there is a High Pressure alarm condition. The Default value is 1500.
C - 4
High Pressure Alarm Reset
After a High Pressure alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is 1480.
High Temperature Alarm Reset
After a High Temperature alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is 180.
High Temperature Alarm Setpoint
The setpoint at which the unit determines that there is a High Temperature alarm condition. The Default value is 200.
Low Differential Pressure Alarm Reset After a Low Differential Pressure alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is
Low Differential Pressure Alarm Setpoint The setpoint at which the unit determines that there is a Low Differential Pressure alarm condition. The Default value is
Low Flow Rate Alarm Reset
After a Low Flow Rate alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is
Low Flow Rate Alarm Setpoint
The setpoint at which the unit determines that there is a Low Flow Rate alarm condition. The Default value is
Low Pressure Alarm Reset
After a Low Pressure alarm occurs, the setpoint at which the unit exits this condition is entered in this location. The Default value is
