Compaq MTEK6000 user manual OPT Revision a Option Board, Description Jumper position

MTEK6000 SERIES USER'S MANUAL

61-OPT Revision A – Option Board

Pulse Output 1:	Use	Terminal 19 (normally open contact)
		Terminal 18 (common 1)
	and	Terminal 17 (normally closed contact)
	For form A output: put JP1 and JP1A both in position A to B.
	For form C output: put JP1 and JP1A both in position B to C (requires external wetting).
Pulse Output 2:	Use	Terminal 16 (normally open contact)
		Terminal 15 (common 2)
	and	Terminal 14 (normally closed contact)
	For form A output: put JP2 and JP2A both in position A to B.
	For form C output: put JP2 and JP2A both in position B to C (requires external wetting).
Pulse Output 3 :	Use	Terminal 13 (normally open contact)
(optional)		Terminal 12 (common 3)
	and	Terminal 11 (normally closed contact)
	For form A output: put JP3 and JP3A both in position A to B.
	For form C output: put JP3 and JP3A both in position B to C (requires external wetting).
Pulse Output 4:	Use	Terminal 10 (normally open contact)
(optional)		Terminal 9 (common 4)
	and	Terminal 8 (normally closed contact)
	For form A output: put JP4 and JP4A both in position A to B
	For form C output: put JP4 and JP4A both in position B to C (requires external wetting).

JP5 can be used as a convenient means to connect pulse input 2 as follows:

Description	Jumper position
connect pulse input 2 to mechanical	JP5 A, B, & C all in
index secondary output
otherwise	JP 5 A, B, & C all out (default)

D-2 January 2002