EFJohnson 8500 manual Clear-To-Talk Tone, Key Press Tone, Confirmation Tone

Page 20

SUPERVISORY TONES

•If this tone sounds after the transmit indicator flashes several times and “NO SITE” appears in the display, an out-of-radio-range condition is indicated. To complete a call, you may need to get closer to your radio system. Once this tone sounds, no more access attempts are made until the push-to-talk switch is released and then pressed again.

•If this tone sounds after the transmitter has been on for an extended period and “TX TIME” also appears in the display, the transmitter has been disabled by the time-out timer feature. Refer to page 25 for more information.

•If this tone sounds as soon as the push-to-talk switch is pressed and “TX DSBL” appears in the display, a channel is selected in the conventional mode that is programmed as receive-only. Refer to page 31 for more information.

Clear-To-Talk Tone

This is a short tone which sounds when the push-to-talk switch is pressed. It indicates that the system has been successfully accessed and speaking can begin. This tone does not sound if the radio system is busy or if the selected system is programmed for conventional operation. Refer to “Clear-To-Talk” on page 24 for more information.

Key Press Tone

This is a short tone that sounds when a key is pressed. This tone can be enabled and disabled by turning power on with the SCN key pressed.

NOTE: The following tones are heard only when making telephone calls.

Confirmation Tone

This is a short tone that sounds when the number just dialed is accepted by the system.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Series Safety Information Battery Recycling Information Page Quick Reference Guide Page Table of Contents Operation with Optional Remote Control Unit Controls Front Panel ControlsControls Optional Keys for Telephone Calls Display Information Front Panel DisplayDisplay Information Standard Calls IntroductionPlacing a Standard Call Receiving a Standard CallSpecial Calls Placing a Special CallReceiving a Special Call Additional Phone Mode Information Landside-Originated CallsDialing The Number Supervisory Tones Intercept ToneConfirmation Tone Clear-To-Talk ToneKey Press Tone System Scan Call Proceed ToneEnd Call Tone Proceed Dialing ToneScan Resume Delay Transmitting In ScanSystem and Group Lockout Other Features Scanning Multi-Net SystemsScanning Conventional Systems Clear-To-TalkTime-Out Timer Group ScanEmergency Button Call IndicatorRTN Return Key Priority Calls Keypad DisableTransmit Inhibit Key Press Tone Disable High/Low Power SelectMULTI-NET and Conventional Modes Channel MonitoringSupervisory Tones Group SelectMonitoring Before Transmitting Conventional Mode OperationTransmit Disable When Busy Receive-Only and Talk-Around Channels Call Guard SquelchOperation with Optional Remote Control Unit Control Unit Controls Miscellaneous Operating Information Operation with Optional Remote Control Unit Auto-Registration Miscellaneous InformationSending Status Information Busy Queuing System Operator ProgrammingSetting Volume Level Display MessagesRechargeable Battery Pack Battery PackTransceiver FCC Licensing Speaking Into MicrophoneOperation At Extended Range Transceiver Service Intrinsically Safe ClassificationClassification of Areas Division Classification of Atmospheres Class/ GroupApproved
Top Page Image Contents