Base Station Transceiver Charging Setup For the Handset Transceiver When the handset transceiver is equipped with rechargeable NiMH batter- ies (supplied), they may be charged using the base station setup as fol- lows:
1.Position the handset transceiver in the base station cradle as shown.
2.Connect the charging adapter plug to the DC 9V jack at the rear of the base station transceiver.
3.Plug the other end of the charging adapter into a 120 VAC outlet.
4.Apply power to the base station; then momentarily press the CHG but- ton. The H indicator lights red indicating the handset transceiver batter- ies are being charged.
5.To terminate battery charge, remove the handset from the cradle or mo- mentarily press the CHG button again; the H indicator will extinguish.
HANDSET TRANSCEIVER EQUIPPEDWITH RECHARGEABLE BATTERIES
BASE STATION WITH CHARGING FEATURE
CHARGING ADAPTER
PLUG
CHARGING (H)
LED INDICATOR
CHARGE (CHG)
ON/OFF BUTTON
AC WALL
CHARGING
ADAPTER
MODEL (P/N F30ADP)
INPUT: 120 VAC
OUTPUT: 9 VDC
11
128-6476
11 of 28