we do recommend that you not change this setting unless it proves to be necessary in your particular situation.
To access the transmitter power selection function, the selected channel must be either GMRS/FRS
-From GMRS/FRS standby mode, press the MODE Button 3 times until the Po HI or Lo indication appears with a flashing HI or LO indica- tion on the display.
NOTE: If the current channel is FRS only
-Press the Up or Down button to toggle between the High and Low se- lections.
-Press the PTT button momentarily to confirm selection.
VOX Selection Mode
This option enables you to have
To set radio for VOX operation:
-From GMRS/FRS standby mode, press the MODE button 4 times until Uo appears with the VOX icon flashing on the display.
-Press the Up or Down button to select VOX On (if oF appears flash- ing) and the
-Momentarily press the PTT button to confirm the VOX selection.
-The VOX icon will appear steady on the LCD display.
A VOX sensitivity of 1 is the most sensitive, and should be used in a rela- tively quiet surrounding. A VOX sensitivity of 5 is the least sensitive and should be used in a noisy surrounding.
VOX can be turned off by selecting oF as the setting.
Dual Watch Mode
This feature allows you to monitor two channels at the same time. While in dual watch mode, the unit will continuously monitor both the primary and dual watch channel. Received signals will be played for 5 seconds, then 17
128-6476
17 of 28