Up Channel/Volume Button
In the standby mode, pressing this button will increment the listening volume. When in function edit mode this button will be used to adjust the unit’s settings.
Down Channel/Volume Button
In the standby mode, pressing this button will decrement the listening volume. When in function edit mode this button will be used to adjust the unit’s settings.
Mode Button
This button is used to select the various feature settings such as channel/ CTCSS code selection, VOX mode, etc.
External Speaker (SPK)/Microphone (MIC) Jacks
These jacks, one on the handset (6), and two on the base station (16,17) accept an external Audiovox headset/microphone connector (optional accessory). For additional optional equipment and accessories for the
Scan/Lock Button
Press this Button momentarily to enable or disable the scan mode. Press and hold the button for more than 1 second to lock or unlock the key pad. All buttons will be active in the lock mode except, MODE and SCAN. When the keypad is locked, the ( 
) icon will display in the top left corner.
Operating Modes and Features
GMRS/FRS Operation:
-From the GMRS/FRS standby mode, press and hold the ( 
) button for 2 seconds to turn on power.
-Press the MODE button so the Channel number flashes.
-Select the desired channel with the Up and Down Buttons. When receiving a call, the Monitor LED lights green, and the signal strength meter, consisting of a
maximum (five bars).
14
128-6476
14 of 28