Tandy 120-2157 manual

FM1, FM2, and FM3).

2.Tune to the station you want to store either by Manual or Auto-Seek Tuning.

3.To store the station's frequency, press one of the memory preset buttons (1-6) for at least 2 seconds. The sound mutes momentarily and M (Memory), the selected memory number, and the frequency of the station appear.

4.Repeat Steps 2-3 for each station you want to store.

Repeat these steps for each memory group where you want to store stations.

Storing Stations in Automatic Travel Programming (ATP) Memory

Follow these steps to store up to 6 strong AM and up to 6 strong FM stations into the stereo's automatic travel programming (ATP) memory.

1.Press BAND to select the desired band (AM1 or FM1). ATP appears.

2.Press PS/AS for at least 2 seconds. The tuner searches the band, storing the first 6 strongest stations in ascending order, then resumes normal radio reception of the last stored station.

CAUTION: Stations you store using Auto Memory Store replace any stations previously stored in the AM1 or FM1 memory group.

Selecting a Stored Station

To select a station you manually stored in AM1, AM2, FM1, FM2, or FM3, repeatedly press BAND to select the desired memory group, then press (do not hold down) a memory preset button (1-6) once. The memory location number (M1, for example) appears.

Preset Scan

The radio can scan all stored station in the selected band, pausing for 5 seconds at each station.

Press PS/AS. The tuner scans the preset stations stored in memory, stopping on each one for five seconds. The memory number (M1, for example) flashes.

To cancel Preset Scan, press PS/AS again. The tuner stops on the currently tuned station.