Midland Radio 74-250(C) manual Channel Frequency

Page 10

7.After setting the 6th-digit of the county code, press SETonce, the number will flash next to CH.

8.Press and release the UP/DOWNbutton to select the channel (1-7).

9.Press and release SETone time to end programming. When no buttons have been pressed for 10 seconds, the

current setting is stored and the display switches to alert display mode automatically. If after 30 seconds there has been no buttons pressed the radio will switch to clock mode.

Channel

Frequency

 

(MHz)

1

162.400

2

162.425

3

162.450

4

162.475

5

162.500

6

162.525

7

162.550

Setting the “County” to listen to.

After setting the county or counties desired you now must select one to listen to.

From the Weather message display:

1.Press and hold the MODEbutton until you see the 6 digit county code on the display. The number next to the word COUNTY will flash. Press the UP/DOWNbuttons to select the county location number desired.

10

Image 10
Contents Owners Guide Features Product InformationControls NWR-SAME See quick use guide What is a Fips Code? To Install Batteries Acquiring Fips codes for the desired AreaDisplay Backlight ProgrammingBefore programming the radio, we suggest turning off From the clock display Channel Frequency Setting the Clock and Temperature units Setting the Date Setting the AlarmsTurning On or Off the Alarms Turning on the Alarm sListening to Weather Broadcasts Using the Alert Function Tune Tv unknown watch Tune Tv unknown warning System Demo What You See What You Hear Required Weekly TestRequired Monthly Test National Periodic Test No soundTroubleshooting Problem SuggestionsMaintenance Page General SpecificationsReceiver Service ONE Year Limited Warranty Code Channel Location