UNIDEN Model uh049sx UHF CB Radio
OPERATION
GROUP SCAN(GS) Mode
To change between OS and GS scan; 1. Press MENU four times.
ENT
GS setting ON or OFF will flash.
2. Press 
or 
to change the selection.
3. Press and hold MENU to save
and exit.
ENT
To initiate scanning,
1.When DUAL is pressed during Group Scan Mode, SCN will blink and Group Scan Scanning begins.
2.To deactivate GS scanning, press 
, 
or 
.
DUAL
1.If SCAN is deactivated while it is tuned to an active channel, the uh049sx will stay on that active channel. If none of the channels re- active, the uh049sx will reinstate the Scan start channel.
2.If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start.
16
uh049sx OM.indd Sec1:16 | 17/8/07 3:01:09 PM |