Uniden 810e owner manual Troubleshootin, Trouble Unit will not turn on. No power Check

Page 6

Troubleshootin

If your PRO81 Deis not performing up to your expectations, please try these simple steps:

Trouble

Unit will not turn on. No power.

Check

1.Check power cord and all connections.

2.Check wall switch if any.

3.Check house electrical system.

Poor reception

1. Check and adjust Squelch.

2.Check antenna system and cable, connec- tors.

3.Check operation mode of the radio.

Weak transmission

1.

Check antenna

system and cable, connec-

 

 

tors.

 

 

2.

Check antenna

grounding.

 

3.

Check for corrosion on connectors.

Ifyou determine that se Nice is necessary contact your local dealer or pack the unit in its original carton. Send it along with a brief, concise description of the prob-

lem, your name, address, phone number, and a copy of the original purchase receipt to the address listed in the warranty.

SERVICING YOUR CB

Technical information, diagrams and charts will be provided upon request. We highly recommend that you consult a qualified radiotelephone technician for ser-

vice and alignment of this radio. When ordering parts, it is important to specify the correct model number and serial number of this radio.

Please refer to the WARNING information on the first page of this manual.

,,',".,c,,'.'

Image 6
Contents Uni en@ Welcome LtLt Installation AntennaPro 810e Front Pro 810e Rear ViewTo Receive Preventative MaintenanceEration To TransmitTrouble Unit will not turn on. No power Check TroubleshootinEcifications ReceiverChannel Fre Uencies Warran Uniden@