Uniden uh036sx-4 manual Power Save, Scanning

Page 9

Operation with the aid of a Repeater

Eg. CH1 is being used in your area for repeater use.

Press

dup

momentarily. The

icon

appears.

 

 

Press

dup

again to deactivate the duplex

operation. UH036SX will return to normal operation.

POWER SAVE

Your UH036SX has a unique circuit designed to dramatically extend the life of the batteries. If there is no transmission nor an incoming call within 2 seconds, your Radio switches to the Power Save mode. The Radio is still able to receive transmissions in this mode.

SCANNING

The scan function scans all channels and stops at an active channel. When the signal stops, the UH036SX waits 2 seconds (Drop-Out Delay) before scanning resumes.

8

Image 9
Contents Uh036sx-4 Included in Your Control & IndicatorsBattery Warning Battery InstallationGetting Started LOW Battery Alert Water WarningBelt Clip Volume Power ON/OFFAdjusting the KEY Beeps OperationTo Transmit and Receive Selecting ChannelRange Monitor Automatic Squelch FeatureScanning Power SaveUser License Information DROP-OUT DelayUHF Channels & Frequencies Uniden UH036SX-4 UHF CB Transceiver Radio Warranty