Uniden uh036sx-4 manual Automatic Squelch Feature, Monitor

Page 8

AUTOMATIC SQUELCH FEATURE

The UH036SX is equipped with an Automatic Squelch system which shuts off weak transmissions and unwanted noise.

MONITOR

This feature enables users to listen in for weak signals on the current channel at the press of a button.

RX

To use monitor,

!Press and hold Volume or for 2 seconds. The RX icon will begin to flash.

!For continuous listening, the receiver circuit will stay open, letting in both the noise & weak signals.

!To return to normal receive mode press Volume or once.

TO OPERATE IN DUPLEX MODE (REPEATERS)

The Duplex function enables you to access local repeater stations. You can only activate Duplex from CH01-CH08.

UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions.

Contact your retailer for a list of repeaters

available in your area.

7

Image 8
Contents Uh036sx-4 Control & Indicators Included in YourGetting Started Battery WarningBattery Installation Belt Clip LOW Battery AlertWater Warning Power ON/OFF VolumeAdjusting the KEY Beeps OperationSelecting Channel To Transmit and ReceiveRange Automatic Squelch Feature MonitorPower Save ScanningDROP-OUT Delay User License InformationUHF Channels & Frequencies Warranty Uniden UH036SX-4 UHF CB Transceiver Radio