Uniden uh036sx-4 manual Getting Started, Battery Warning, Battery Installation

Page 3

GETTING STARTED

BATTERY WARNING

To retain the previous user settings, the UH036SX will continue to use a small amount of battery

power when switched off. To prevent the batteries from running down, remove them from the radio if the UH036SX will not be used for long periods.

BATTERY INSTALLATION

Your UH036SX radio uses 3 AAA ALKALINE batteries for power. Use only good quality alkaline batteries for maximum life and range. Note: Batteries are not supplied.

To avoid damage to the unit do not mix old and new batteries.

1. Make sure your radio is off.

2. Remove the battery cover.

3. Insert 3 AAA ALKALINE batteries according to the polarity symbols inside the battery compartment.

4. Replace the battery cover.

2

Image 3
Contents Uh036sx-4 Included in Your Control & IndicatorsBattery Warning Battery InstallationGetting Started LOW Battery Alert Water WarningBelt Clip Operation Power ON/OFFVolume Adjusting the KEY BeepsTo Transmit and Receive Selecting ChannelRange Monitor Automatic Squelch FeatureScanning Power SaveUser License Information DROP-OUT DelayUHF Channels & Frequencies Uniden UH036SX-4 UHF CB Transceiver Radio Warranty