Instructions Operating Instructions Safety Instructions
About the controls on the air
Cool on
Fan on
Timer on
Air Conditioner Controls | Remote Control |
Controls
Tips Installation
ON/OFF Pad
Turns air conditioner on and off.
Display
Shows the set temperature or time remaining on timer.
MODE
Use to set the air conditioner to COOL or FAN mode.
Increase ▲ /Decrease ▼ Pads
Use to set temperature when in COOL mode.
TIMER Pad
To cancel the timer, press the TIMER pad until the display time disappears.
Support Troubleshooting
FAN Pad | Remote Control Signal Receiver |
Use to set the fan speed to LOW (F1), MED (F2) |
|
or HIGH (F3). |
|
In the case of a power outage or interruption, the | set, it will resume its countdown. You may need |
unit will automatically | to set a new time if desired. |
used after the power is restored. If the TIMER was |
|
Consumer
■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.
■The remote control signal has a range of up to 21 feet.
4
■Make sure nothing is between the air conditioner and the remote control that could block the signal.
■Make sure batteries are fresh and installed correctly as indicated on the remote control.