GE AGS05 Operating Instructions Safety Instructions, ON/OFF Switch, FAN SPEED Switch, Controls

Operating Instructions Safety Instructions

About the controls on the air conditioner—models with a control knob.

Features and appearance may vary.

FAN ONLY

COOL

ON

FAN SPEED

Low Hi

Off On POWER

Controls

Consumer Support Troubleshooting Tips Installation Instructions

ON/OFF Switch

Turns air conditioner on and off.

NOTE: If the air conditioner is off and is then turned on while set in the COOL ON mode, it will take approximately 3 minutes for the compressor to start and cooling to begin.

FAN SPEED Switch

Use to set the fan speed to Low or Hi.

Mode/Temp Control

Use to set the air conditioner to the FAN ONLY or the COOL ON mode.

FAN ONLY Mode

Use FAN ONLY at Hi or Low FAN SPEED to provide air circulation and filtering without cooling.

COOL ON Mode

Use COOL ON with Hi or Low FAN SPEED for cooling. Turn the knob toward COOLER (larger blue area) for the indoor air to become cooler. Turn the knob toward the smaller blue area for the indoor air to become warmer.

The Mode/Temp control is used to maintain the room temperature. When set in the COOL ON mode, the compressor will cycle on and off to keep the room at the same level of comfort.

Cooling Descriptions

For Normal Cooling—Select the COOL ON mode with the Mode/Temp knob set at the midpoint.

For Maximum Cooling—Select the COOL ON mode with the Mode/Temp knob set toward COOLER (larger blue area).

For Quieter & Nighttime Cooling—Select the COOL ON mode with the Mode/Temp knob set toward the smaller blue area.

NOTE: If you move the Mode/Temp control knob from the COOL ON setting to the FAN ONLY setting, wait at least 3 minutes before switching back to a COOL ON setting.

6