Operation
Before operating the PRO501 XL:
1.Be sure you read and understand SMA Rules and Regulations.
2.Be sure that the power cord, microphone and antenna are properly connected.
3.Turn the power on by sliding the PWR switch to ON.
Receive
1.Use the CHANNEL SELECTOR buttons to select any of the 40 channels.
2.Set the VOLUME control to a comfortable listening level.
3.Adjust the SQUELCH control to eliminate background noise during the absence of a signal. Rotate SQUELCH to the right until the noise disappears (no signal should be present). Leave the control at this setting. The receiver will remain quiet until a signal is actually received.
Note: Do not advance the control too far, or some weaker signals willnot be heard.
Transm it
1.Set the CHANNEL SELECTOR to the desired channel.
2.If the channel is clear, press the
IMPORTANT: All channels, except channel 9, may be used for normal communica-
tion. Channel 9 is reserved for emergency communications involving the immediate
safety of individuals or the protection of property.
This is a rule and applies to all operators of CB radios.
Emergency Operation
1.Press the CHANNEL SELECTOR buttons to reach Channel 9. If the channel is
clear, press the
2.It is possible that your present location is out of range to those who monitor Channel 9. If there is no response to your emergency call on Channel 9, set the CHANNEL SELECTOR to find an active channel. Ask the party on that channel for assistance in relaying your emergency message on Channel 9 in their area.
Rules You Should Know
When operating your CB, there are a few important rules to observe:
. It is prohibited to blast others off the air by Qverpowering them with illegally amplified transmitter power.
. You must not use the CB to promote illegal activities.
. It is illegal to use profanity.
. You may not play music in your CB.
. You may not use yourCB to sell merchandise or professional services.