Uniden PRO501XL manual Specifications, Transm iller

Page 8

Specifications

Channels:

Frequency Range:

Frequency Control:

Frequency Tolerance:

Operating Temperature:

Microphone:

Input Voltage:

Size:

Complete Package: Antenna Connector:

Transm iller

Power Output:

Modulation:

Frequency Response: Output Impedance:

Receiver

Sensitivity:

Selectivity:

ImageRejection:

IFFrequency:

Automatic Gain Control (AGC):

Squelch:

Frequency Response: Distortion:

Internal Speaker:

40AM

26.965 to 27.405 MHz

Phase Locked Loop (PLL) synthesizer :t 0.005%

-30 °c to + 60°C Electret Condenser type

13.8VDC nominal Negative Ground ONLY

120mm (W) x 170mm (D) x 40mm (H)

0.46kg. M-Type

2.8 Watts (nom), 4.0 Watts (max)

Class B amplitude modulation 300 to 2500 Hz

50Q unbalanced

O.5JlV for 1 0 dB; (S+N)/N typical

6 dB @ 7 kHz, 70 dB @ 10kHz typical 80 dB typical

Double Conversion Superheterodyne 1st: 10.692 MHz

2nd: 450 kHz

Less than 10 dB change in audio output for inputs from 10 to 50,000 JlV

Adjustable; threshold less than 1 JlV 300 to 2000 Hz

Less than 10% at 0.4 watts, 1000 Hz 16Q, 3 watts round

Specifications shown are typical and subject to change without notice.

I

Image 8
Contents UnidE!no Unpacking Your CB Radio IntroductionOperation Before operating the PRO501 XLTo connect the Cigarette LighterAdapter Plug Attaching the Magnetic MountAntennaFront Panel Rear PanelInstallation Connecting the Power CordCB Antenna TIps Connecting the MicrophoneConnecting the Antenna Specifications Transm illerReplacing the Fuse in the DC Power Cord Servicing Your CBWarranty