:
Troubleshooting
If the PRO501XLdoes not perform to your expectations, please try the troubleshooting suggestions listed below.
Problem | .Check |
| Suggestion | ||
Unit does not power on. | the wiring | connections. | |||
| .Check the | fuse. | |||
| . Check | the vehicle |
| electrical system. | |
Poor reception. | Check | and adjust | the SQUELCH. | ||
| . Check | the | antenna | connect;ons. | |
Weak Transmission. | .Check | the | antenna | connections. | |
Servicing Your CB
If you determine that service is necessary, contact your local dealer or return the unit in its original carton to Uniden - Service Division. Ship the item with a brief and concise description of the problem, your name, address, a telephone number where you can be reached during working hours and a copy of the original purchase receipt to the address listed in the warranty (at the end of this manual).
Technical information. diagrams. and charts are available upon request. It is the user's responsibility to see that this radio is operating at all times in accordance with the SMA Citizens Band Radio Service regulations. We highly recommend that you consult a qualified radiotelephone technician for service and alignment of this radio.
When ordering parts, please specify the correct model number and serial number of this radio.
Please refer to the 'WARNING" information at the front of this manual.
Care and Maintenance
The PRO501XLis designed to give you years of
Note: Do not expose the unit to moisture. Rain, dew, road splash, or other liquids
may damage the internal components.
Replacing the Fuse in the DC Power Cord
The
To inspect or replace a blown fuse:
1.Press the ends of the fuse holder together and twist counterclockwise. Carefully separate the two halves.
2.Remove the fuse and inspect. If blown replace it with the same type.
3.Replace fuse inside the holder and reassemble the two halves by pressing the ends together and twisting c1ockwise.
.