La Crosse Technology WS-7107U instruction manual Troubleshooting, Solution

Page 19

TROUBLESHOOTING

NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, or visit our website, www.lacrossetechnology.com

Problem: The LCD is faint

Solution: Replace batteries

Problem: No outdoor temperature or humidity is displayed.

Solution:

1)First try to re-establish communication between the remote sensor and indoor weather station by moving both units to within three to five feet of each other. Wait about ten minutes and then check for a temperature and humidity.

2)If this does not work please remove the batteries from both units and restart the system (please see Detailed Set-up on page nine through eleven).

Note: Please make sure when restarting the system that all batteries are fresh.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents WS-7107U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page AM hours this area will be blank Page Replace Page Features Minimum and Maximum Temperatures Adding Additional Remote TEMP/HUMIDITY Sensors Optional Resetting the Minimum and Maximum TemperaturesPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote TEMP/HUMIDITY Sensor Weather Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsRemote Temp/Humidity Sensor Indoor Weather Station Warranty Information Page Support@lacrossetechnology.com FCC Disclaimer
Top Page Image Contents