La Crosse Technology WS-7107U instruction manual

Page 9

1.Remove battery cover

2.Observing the correct polarity, install 2 AA batteries—make sure they do not spring free, or start-up problems may occur.

3.Replace cover.

B.INDOOR WEATHER STATION Note: After the batteries are installed, DO NOT press any buttons for 15 minutes. This may interfere with the signals, causing temperatures to register incorrectly.

1.Remove the battery cover on the backside. To do this, push up and pull out.

2.Observing the correct polarity, install 2 AA batteries.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents WS-7107U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page AM hours this area will be blank Page Replace Page Features Minimum and Maximum Temperatures Adding Additional Remote TEMP/HUMIDITY Sensors Optional Resetting the Minimum and Maximum TemperaturesPage Page Viewing and Operating with Multiple Remote Sensor Units Mounting Remote TEMP/HUMIDITY Sensor Weather Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsRemote Temp/Humidity Sensor Indoor Weather Station Warranty Information Page Support@lacrossetechnology.com FCC Disclaimer
Top Page Image Contents