Quick Setup

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1.Have the indoor weather station and remote temp/humidity sensor 3 to 5 feet apart.

2.Batteries should be out of all units for 10 minutes.

3.Place the batteries into the remote temp/humidity sensor first, then into the indoor weather station.

(All remote temp/humidity sensors must be started before the indoor weather station)

4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the indoor weather station and remote temp/humidity sensor will start to talk to each other and the displays will show both the indoor temperature and an outdoor temperature and humidity. If the indoor