Problem: No reception of WWVB time signal.
Solution: 1) Wait overnight for signal.
2)Be sure indoor weather station is at least 6 feet from any electrical devices, such as televisions, computers, or other
3)Remove batteries for five minutes, reinsert and leave the unit alone overnight without pressing buttons.
4)If there are still problems, contact La Crosse Technology
Problem: Hour is incorrect (minute and date are correct)
Solution: Be sure correct time zone and daylight saving time are selected.
Problem: The LCD is faint
Solution: 1) Set the LCD contrast to a higher number 2) Replace batteries
Problem: No outdoor temperature is displayed.
Solution: 1) Remove all batteries, reinsert into remote thermo/hygro sensor first, then indoor weather station.
2)Place remote thermo/hygro sensor closer to display.
3)Be sure all batteries are fresh.
NOTE: For problems not solved, please contact La Crosse Technology.
MAINTENANCE AND CARE INSTRUCTIONS
22