La Crosse Technology WS-7078UF Specifications, Temperature measuring range, Power Supply

Page 24

SPECIFICATIONS

Temperature measuring range:

Indoor:	32°F to 139.8°F with 0.2°F
	resolution. (0°C to 59.9°C with
	0.1°C resolution). “OFL”
	displayed if outside this range.
Outdoor:	-21.8°F to 157.2°F with 0.2°F
	resolution. (-29.9°C to 69.9°C
	resolution). “OFL” displayed if
	outside this range.

Relative humidity measuring	19% to 95% with 1%
range:	resolution. (“- -” displayed if
	outside this range.
Indoor Temperature checking	Every 10 seconds.
interval:
Indoor Humidity checking	Every 1 minute.
interval:
Outdoor Temperature and	Every 1 minute.
Humidity checking interval
(Remote Thermo/hygro
Sensor):
Outdoor Temperature and	Every 3 minutes.
humidity reception (Indoor
Weather Station):
Transmission Range:	80 feet (in open space).
Power Supply:
Indoor Weather Station:	2 x AA, IEC LR6, 1.5V.
Remote Thermo/hygro Sensor:	2 x AA, IEC LR3, 1.5V.
Battery life cycle:	Approximately 12 months.
Recommended battery type:	Alkaline.

Dimensions (L x W x H)
Indoor Weather Station	4.48 x 1.18 x 7.04 in
(without stand):	(114 x 30 x 179mm).
Remote Thermo/hygro Sensor:	1.56 x 0.78 x 4.29 inches
	(40 x 20 x 110 mm).

24

Image 24

Contents WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Table of Contents Detailed Set-Up GuideInventory of Contents About Wwvb Radio Controlled Time Quick SET-UP Guide Do not Press ANY Buttons for 10 MinutesDetailed SET-UP Guide Battery Installation Remote Thermo/hygro SensorIndoor Weather Station Program Mode Function Keys12 or 24 Hour Time Setting Time Zone SettingDaylight Saving TimeDST Setting Wwvb Remote Control Time Manual Time SettingTime Setting the Day, Date, and Year Setting the LCD Contrast Features of the WS-7078USelecting F or C Weather Forecast Weather IconsForecast LCD Weather Tendency ArrowsIII. Outdoor Temperature and Humidity IV. Minimum and Maximum Temperature RecordsViewing the Indoor Temperature Records Viewing the Outdoor Temperature Records Resetting the Minimum and Maximum RecordsAlarm Function Setting the Alarm Alarms 1 Snoozing and Stopping the AlarmVI. Adding Remote Thermo/hygro Sensors Optional Set-up of Multiple UnitsViewing and Operating with Multiple Thermo/hygro Sensors MountingRemote Thermo/hygro Sensor A. Mounting With Screws Using the Table Stand TroubleshootingMounting With Adhesive Tape II. The Indoor Weather StationMaintenance and Care Instructions Page Specifications Temperature measuring rangePower Supply Dimensions L x W x HWarranty Information Support@lacrossetechnology.com