WWVB (Radio controlled time)
This method requires you to do nothing but wait for the signal (WWVB) to be received (the unit will set to the default setting shown on the following page once the signal is received). This usually will take place overnight when the WWVB signal is the strongest. To keep your time accurate the weather station conducts a WWVB search every night. The WWVB tower icon (appearing in the time LCD) will be on when the signal has been received. It is not uncommon for the signal to not be received every night, don’t worry the quartz movement will keep accurate time until the WWVB signal can be received again.
6
Manually (see “C” below)
Automatically via WWVB reception
There are two methods by which the time can be set:
•
•
NOTE:
Programming Note: If 20 seconds is allowed to pass during programming modes the unit will confirm/set the last information entered, the display will stop flashing and return to normal time- date readings.
Function Keys:
I.