TROUBLESHOOTING
Problem: | The Projection is faint | ||
| 1) | Use AC adapter | |
Solution: | 2) Darken surroundings | ||
| 3) | Use fresh batteries (if AC is not used) | |
Problem: | The LCD is faint. | ||
Solution: | Replace the batteries. | ||
Problem: | “OFL” appears in the indoor temperature LCD. | ||
Solution: | 1) | Move unit to an area with warmer or cooler surrounding | |
temperature. | |||
| 2) | Current surrounding temperatures are outside measuring range. | |
Problem: | No reception of WWVB signal. | ||
| 1) | It may help reception to face the front of the projection alarm in the | |
|
| general direction of Ft. Collins, Colorado. | |
| 2) | Wait overnight for signal. | |
Solution: | 3) | Be sure the projection alarm is at least 6 feet from any electrical | |
| devices, i.e. TV sets, computers, or other radio controlled clocks. | ||
|
| ||
| 4) | Remove batteries for five minutes, reinsert and leave the unit alone | |
|
| overnight without pressing buttons. | |
| 5) | If problems persist contact La Crosse Technology. | |
Problem: | Hour is incorrect (minute is correct). | ||
Solution: | Be sure correct time zone and daylight saving time are selected. | ||
Problem: | |||
| 1) | Check batteries in remote | |
Solution: | 2) If batteries are replaced in remote, the unit must be | ||
| Remove all batteries, and then follow start up procedure. | ||
Problem: | “OFL” appears in the outdoor temperature LCD | ||
| 1) | Remote temperature is out of range. | |
Solution: | 2) | Check batteries. | |
3) | Interference from an outside source (cordless telephone, etc.) | ||
| |||
| 4) | Contact La Crosse Technology. | |
Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual.
12