2)Press and release the "+" button to toggle between 12 and 24 hour time.
3)Press and release the "SET" button to confirm the
VIII) SELECTING ˚F OR ˚C
1)Hold down the "SET" button for 2 seconds (the selected time zone will flash), press and release the "SET" button 10 more times until the default "˚F" flashes in the time LCD.
2)Press and release the "+" button to toggle between ˚F and ˚C.
3)Press and release the "SET" button to confirm the ˚F or ˚C selection and exit the Program Mode.
GB P.22
5)Press and release the "+" button a third time and the display will return to the normal display.
II) THE ALARM
1) SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25 second periods, the rate of the alarm increases.
(a)Hold down the "ALARM" button for 5 seconds. The "TIME" icon to the right of the minutes (in the time LCD) shifts to "ALARM" and the hour digit of the alarm flashes.
(b)Press and release the "+" button to set the alarm hour.
GB P.24
alarm "sound" icon to the right of the time).
(b)Press and release the "ALARM" button to activate and deactivate the alarm. The alarm "sound" icon to the right of the time will appear or disappear and the alarm time will be displayed briefly before returning to the normal display mode.
3) ACTIVATING THE SNOOZE FUNCTION
(a)While the alarm is sounding, press and release the "SNOOZE" button to activate the snooze function.The alarm "sound" icon and "SNOOZE" icon (to the right of the time) will flash. The duration of the snooze function is 10 minutes, then the alarm will resume.
GB P.26
FEATURES & OPERATIONS
I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE)
There are three possible display modes to view the day, seconds, and temperature. The month & date/ weekday /indoor temperature/remote temperature is the default.
To change the display:
1)Press and release the "+" button.
2)The display should now show the month&date/ seconds/indoor temperature/ remote temperature
3)Press and release the "+" button a second time.
4)The display will now show the month&date/weekday/ seconds/remote temperature
P.23 GB
(c)Press and release the "ALARM" button to confirm the hour and to set the alarm minutes.
(d)The alarm minutes will now flash.
(e)Press and release the "+" button to set the alarm minutes.
(f)Press and release the "ALARM" button to confirm and to exit the alarm setting mode.
Note: The alarm will be automatically set to sound when exiting the alarm- setting mode (indicated by the alarm "sound" icon to the right of the time).
2) ACTIVATING/DEACTIVATING THE ALARM
(a)The alarm will be automatically set to sound when exiting the alarm- setting mode (indicated by the
P.25 GB
4) SUSPENDING ALARM
(a)While the alarm is sounding or the SNOOZE is active, press and release the "ALARM" button to suspend the alarm until the next day.
III) INDOOR TEMPERATURE
The indoor temperature appears on the right side of the date LCD. The temperature is checked every 10 seconds and updated whenever there is a change.
IV) REMOTE TEMPERATURE
The remote temperature will be shown on the right side of the lower LCD screen. The temperature alarm receives the outdoor temperature (˚F or ˚C) from the remote temperature sensor, and the temperature appears in
P.27 GB