Memorizing the Channels | Samsung LN-R1742 instruction

OP E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press the MENU button to display the menu.

Press the

UP/DOWN buttons to select “Channel”, then press the ENTER button.

2

Press the ENTER button to cycle through these choices:

Air, STD, HRC, or IRC (all cable TV).

Press the UP/DOWN buttons to select the Video signal source, then press the ENTER button.

Press the EXIT button to exit.

Note : STD, HRC and IRC identify various types of cable

TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

Proceed to “Storing Channels in Memory” (next page).

English-16

Image 21

Samsung LN-R1742 manual Memorizing the Channels, Selecting the Video Signal-source

Contents

LN-R1742 Precautions When Displaying a Still Image Page Special Features InstallationYour New TV Operation Troubleshooting PC DisplayAppendix List of Parts List of Features Familiarizing Yourself with Your New TV Front Panel ButtonsVOL + Rear Panel Jacks Remote Control If remote control doesn’t work Installing Batteries in the Remote Control Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All Channels English-9 Connecting a VCR Connecting an S-VHS VCR Component Connecting a DVD Player Adjusting the Volume Turning the TV On and OffChanging Channels Viewing the Menus Viewing the Display Chapter Four Plug & Play Feature Memorizing the Channels Selecting the Video Signal-source Storing Channels in Memory Automatic Method To check the channels stored in memoryTo select channels over Alternate method ADD and DEL Channels Manual Method To select the Input Source To Edit the Input Source Name Alternate method Using Automatic Picture Settings LEFT/RIGHT Customizing the Picture Using Automatic Sound Settings To select the Sound option Selecting a Menu Language Setting the Blue Screen Mode Adjusting the Color Tone Reduces the differences in volume level among broadcasters Automatic Volume Control Option 1 Setting the Clock Manually Setting the Clock Enter button This feature Setting the On/Off Timer Auto Power Off Sleep timer Setting the Sleep Timer Viewing Closed Captions Setting Up Your Personal ID Number PIN Using the V-Chip How to Enable/Disable the V-Chip TV-MA How to Set up Restrictions Using the ‘TV guidelines’ English-39 English-40 General audience no restrictions Canadian English How to Set up Restrictions Using the Canadian English Canadian French How to Set up Restrictions Using Canadian French How to Set up Your PC Software Windows only Using Your TV as a Computer PC Display Adjusting the Screen Quality Changing the Screen Position To Initialize the Screen Position or Color Settings How to Auto Adjust English-49 English-50 English-51 Customizing the Color Chapter Six Identifying Problems Move the computers mouse or press any key on the keyboard Using the Anti-Theft Kensington Lock Retractable Stand Mounting pad Installing Vesa compliant mounting devices Installing the Wall Mount Kit How to assemble the Wall Mount KitComponents Angle adjustment section of wall-mounted LCD TV How to adjust an angle Using Your TV in Another Country Display Mode Specifications