La Crosse Technology WD-3106UR-B owner manual Toggle Between Time, Date & Temperature

Page 13

Version 1.1 - 11/13/2008

“+” Key

Toggle Between Time, Date & Temperature

The “+” Key cycles through the date, seconds and indoor temperature on the top segment of the LCD

View Outdoor Temperature – Only With Optional TX-50U Wireless Outdoor Temperature Sensor

Press the “+” key to view the current outdoor temperature from your synchronized wireless outdoor sensor.

Because the “+” key is used to toggle between time, date and temperature, when you press the “+” key to view the outdoor temperature, you also switch to the next view mode on the top segment of the LCD. Simply press the “+” key until you are also viewing the desired mode: time, date or temperature.

Manually Request a Weather Direct® LITE Data Update

When you register your Wireless Display, the weather data is updated within a few minutes. Every 6 hours after that, your Wireless USB Transceiver will send weather data to update your Wireless Display.

After changing the forecast location or other setting on the web site, it can be up to six hours for your next scheduled automatic update.

After adding an Expansion Option to your Wireless Display, it can be up to six hours for your next scheduled automatic update.

If you do not want to wait for your Wireless Display to update automatically, Press and Hold the “+” Key for 3 seconds until your Wireless Display beeps once. A second beep within a few seconds will signify that the Wireless Display has received the data.

“SET” Key

When ADD 4 LOCATIONS Expansion Option is Active

Press the “SET” Key to toggle between the forecast locations on the Wireless Display when the ADD 4 LOCATIONS Expansion Option is active. The name of the location will appear briefly on the bottom of the LCD when it is selected. Weather data for up to 5 locations can be viewed on your Wireless Display.

Page 13 of 25

Image 13
Contents DAY Internet Powered Weather Station Table of Contents Add Optional Secure Weather Gateway Quality Forecasts CongratulationsWeather Direct Lite is Green Included in the Box MHz Wireless Sensor TechnologyWhat You Need to Get Started To Surface Mount the Outdoor Sensor Set Up your WD-3106UR-B Hardware InstallationOnline Resources Wireless USB Transceiver InstallationTo Wall Mount the Outdoor Sensor Time Setting on Wireless Display FeaturesWireless Display Operation Optional TX-50U Wireless Outdoor SensorMode Key Set Alarm Time Turn Alarm ON/OFFManually Request a Weather Direct Lite Data Update Toggle Between Time, Date & TemperatureWhen ADD 4 Locations Expansion Option is Active Four SET modes are Set Mode 1 Set LCD Contrast Changing Settings on Your Wireless DisplaySet Mode 4 View Device ID Factory Reset of Wireless DisplayFree Trial of Expansion Options for 14 Days To Perform the Factory ResetAdd Optional Secure Weather Gateway Watches Forecast Icons Explained Battery Low Icons Care and MaintenanceTroubleshooting Specifications Battery ReplacementLiability Disclaimer Power RequirementsFCC Statements Warranty Information Version 1.1 11/13/2008