La Crosse Technology WD-3106UR-B Wireless USB Transceiver Installation, Online Resources

Page 8

Version 1.1 - 11/13/2008

bottom of the Sensor onto the holding pegs of the stand until they click into place in the grooves on the Sensor.

To Wall Mount the Outdoor Sensor:

The Outdoor Sensor is weather resistant, but not water proof. To ensure maximum Sensor life, mount it in a covered place out of the elements like under the eaves. Placement on the North side of your

home will provide the most accurate readings. Mount it about 18” down from the eaves for optimum performance. This ensures that the

weather data collected by the Outdoor Sensor will not be affected by the temperature of the air leaving the attic.

We have provided a mounting plate that you can attach to the wall with the supplied screws. Gently snap the Sensor onto the holding pegs on the mounting plate after the plate is screwed to the wall. When the holding pegs are securely locked into the slots on the Sensor, you will hear a “Click”.

Wireless USB Transceiver Installation

The Wireless USB Transceiver sends weather forecasts to your Wireless Display over a maximum 100 ft. range. Walls and other obstructions between the Wireless USB Transceiver and Wireless Display will affect the range. The Wireless Signal Icon will indicate the signal strength to let you know if your Wireless USB Transceiver and Wireless Display are within range.

Online Resources

These links can help to enrich your Weather Direct® LITE experience:

Help – www.weatherdirect.com/help

FREE Membership Included to the Weather Club, at www.theweatherclub.com featuring:

ƒOnline weather forecasts by Meteorologist Paul Douglas

ƒRadar maps

ƒVideo and photo uploads

ƒAnd Much more!

For a list of places to choose from as forecast locations - www.weatherdirect.com/places

Page 8 of 25

Image 8
Contents DAY Internet Powered Weather Station Table of Contents Add Optional Secure Weather Gateway Weather Direct Lite is Green CongratulationsQuality Forecasts MHz Wireless Sensor Technology Included in the BoxWhat You Need to Get Started Set Up your WD-3106UR-B Hardware Installation To Surface Mount the Outdoor SensorTo Wall Mount the Outdoor Sensor Wireless USB Transceiver InstallationOnline Resources Features Time Setting on Wireless DisplayOptional TX-50U Wireless Outdoor Sensor Wireless Display OperationMode Key Turn Alarm ON/OFF Set Alarm TimeWhen ADD 4 Locations Expansion Option is Active Toggle Between Time, Date & TemperatureManually Request a Weather Direct Lite Data Update Changing Settings on Your Wireless Display Four SET modes are Set Mode 1 Set LCD ContrastFactory Reset of Wireless Display Set Mode 4 View Device IDTo Perform the Factory Reset Free Trial of Expansion Options for 14 DaysAdd Optional Secure Weather Gateway Watches Forecast Icons Explained Care and Maintenance Battery Low IconsBattery Replacement Troubleshooting SpecificationsPower Requirements Liability DisclaimerFCC Statements Warranty Information Version 1.1 11/13/2008