La Crosse Technology owner manual Set Up your WD-3106UR-B Hardware Installation

Page 7

Version 1.1 - 11/13/2008

IMPORTANT MESSAGE:

Please DO NOT insert batteries into the Wireless Display or the Outdoor Sensor until instructed to do so.

Set Up your WD-3106UR-B

Open www.weatherdirect.com in a web browser and click “REGISTER” at the top of the page. Our Online Registration Wizard will guide you through the complete registration process.

Hardware Installation

NOTE: Hardware installation is only intended to be performed after you have registered your Wireless USB Transceiver and Wireless Display and have confirmed successful reception of weather data.

Optional TX-50U Wireless Outdoor Sensor Installation Options

OPTIONAL: TX-50U Wireless Outdoor Temperature Sensor – Measures the outdoor temperature where you are and sends temperature data to your Wireless Display with a wireless range of up to 330 feet (open air). See www.weatherdirect.com for details on how to add this sensor to your system.

NOTE: Move the Wireless Outdoor Sensor into its intended location and wait for 10 minutes to make sure the outdoor temperature is still being received by the Wireless Display. Press the “+” Key on your Wireless Display to show the outdoor temperature. If the display shows - -,-F for the outdoor temperature, the signal cannot reach the Wireless Display. Find a closer location to mount the Wireless Outdoor Sensor and wait 10 minutes to check the Wireless Display again for reception.

DO NOT mount the Wireless Outdoor Sensor in a permanent fashion until you are sure the signal is being received by the Wireless Display.

To Surface Mount the Outdoor Sensor:

We have provided a mounting plate that you can attach to a surface with the supplied screws. The Sensor can be positioned on a flat surface by securing the stand to the bottom by gently pushing the

Page 7 of 25

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DAY Internet Powered Weather Station Table of Contents Add Optional Secure Weather Gateway Quality Forecasts CongratulationsWeather Direct Lite is Green Included in the Box MHz Wireless Sensor TechnologyWhat You Need to Get Started To Surface Mount the Outdoor Sensor Set Up your WD-3106UR-B Hardware InstallationOnline Resources Wireless USB Transceiver InstallationTo Wall Mount the Outdoor Sensor Time Setting on Wireless Display FeaturesWireless Display Operation Optional TX-50U Wireless Outdoor SensorMode Key Set Alarm Time Turn Alarm ON/OFFManually Request a Weather Direct Lite Data Update Toggle Between Time, Date & TemperatureWhen ADD 4 Locations Expansion Option is Active Four SET modes are Set Mode 1 Set LCD Contrast Changing Settings on Your Wireless DisplaySet Mode 4 View Device ID Factory Reset of Wireless DisplayFree Trial of Expansion Options for 14 Days To Perform the Factory ResetAdd Optional Secure Weather Gateway Watches Forecast Icons Explained Battery Low Icons Care and MaintenanceTroubleshooting Specifications Battery ReplacementLiability Disclaimer Power RequirementsFCC Statements Warranty Information Version 1.1 11/13/2008
Top Page Image Contents