OPTIONAL FIELD INSTALLED ACCESSORIES
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20 amps each and one dual voltage, full KVA plug rated at 120/240V, 50 amps. 120V plug may not be compatible with NEMA common house- hold receptacles.
K802-R POWER PLUG KIT - Provides four 120V plugs rated 15 amps each and one dual voltage, full KVA plug rated at 120/240V, 50 amps, 120V plug is compatible with NEMA common household recepta- cles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CON- TROL - Portable control provides same dial range as the output control on the welder from a location up to the specified length from the welder. Has convenient plug for easy connection to the welder. The AIR VANTAGE® 500 CUMMINSis equipped with a 6-pin connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of electrode cable and 30 feet (9 m) of work cable, head- shield, filter plate, work clamp and electrode holder. Cable is rated at 500 amps, 60% duty cycle.
K2641-2 FOUR WHEELED STEERAbLE YARD TRAILER
For in plant and yard towing. Comes standard with a Duo-Hitch™, a 2” Ball and Lunette Eye combination Hitch.
K2636-1 TRAILER - Two-wheeled trailer with optional fender and light package. For highway use, consult applicable feder- al, state, and local laws regarding possible additional require- ments. Comes standard with a Duo-Hitch™, a 2” Ball and Lunette Eye combination hitch. A fender & a light package. Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
K887-1 ETHER START KIT - Provides maximum cold weath- er starting assistance for frequent starting below 10°(-12°C). Required Ether tank is not provided with kit.
K1847-1 SPARK ARRESTOR KIT - Easily mounts to stan- dard muffler.
WARNING
Pipe Thawing with an arc welder can cause fire, explosion, damage to electric wiring or to the arc welder if done improperly. The use of an arc welder for pipe thawing is not approved by the CSA, nor is it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
K2354-1 Air Dryer Kit - Minimizes water content in supply air. Avoids cold weather air hose ice up.
K2356-1 Control Panel Cover Kit - Clear plexiglass cover to protect control panel from dirt and debris, and to visually monitor machine operation. Lockable to deter vandalism.
K2340-1 Lockable Fuel Cap / Flash Arrester Kit - For use in locations where flash arrester safety is required. Lockable fuel cap prevents tampering with fuel. Green cap color provides a visual reminder to use diesel when refueling.
K2359-1 Cold Weather Heater and Tarp Kit - For extreme cold conditions where normal engine starting is not sufficient. Includes oil pan heater, engine water heater and radiator grill tarp.
TIG OPTIONS
K870 Foot Amptrol® - Varies current while welding for making critical TIG welds and crater filling. Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the afterflow cycle on systems so equipped. Includes 25 ft. (7.6m) control cable.
K963-3 Hand Amptrol® - Varies current for making critical TIG welds. Fastens to the torch for convenient thumb control. Comes with a 25 ft. (7.6m) cable. (for larger handle 18 or 26 series torches)
