La Crosse Technology WS-8007U instruction manual VII 12/24-HOUR Setting, Viii Selecting F or C

9)Press and release the “SET” button to confirm the date and to set the weekday.

10)The default weekday “MON” (depends on selected language) will flash.

11)Press and release the “+” button to select the appropriate weekday.

12)Press and release the “SET” button to confirm the calendar settings and to advance to select either 12 or 24-hour time display.

VII) 12/24-HOUR SETTING

1)The “12” hour time display will be flashing in the time LCD.

2)Press and release the “+” button to toggle between 12 and 24 hour time.

Note: 12-hour uses AM/PM, 24-hour is also known as “military” time.

3)Press and release the “SET” button to confirm the 12/24-hour time display and to advance to select either °F or °C.

VIII) SELECTING °F OR °C

1)The default “°F” will be flashing in the time LCD.

2)Press and release the “+” button to toggle between °F and °C.

3)Press and release the “SET” button to confirm the °F or °C selection and exit the Program Mode.

FEATURES & OPERATIONS

I)CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the date, seconds, and temperature:

1)Month & date/weekday/moon phase/indoor temperature (default)

2)Month & date/weekday/moon phase/second.

3)Month & date/seconds/moon phase/indoor temperature

To change the display mode press and release the “+” button to toggle through these display modes.

II)THE ALARM

A)SETTING THE ALARM

Note: The duration of the alarm is 85 seconds. After each of the first two 25 second periods, the rate of the alarm increases.

1)Hold down the “ALM” button for 5 seconds. The “TIME” icon to the right of the minutes (in the time LCD) shifts to “ALARM” and the hour digit of the alarm flashes.

7